Transportation of Vitrified clay pipes

Carrying pipes by forklift

Vitrified clay pipes are delivered in packaged pallets and they must be unloaded directly from the trailer and placed on a smooth and firm surface.

When transported pipes are stored as pallets, to transport the pipes, it must be ensured that the fork width and resistance of the forklift are sufficient to carry the appropriate load and that the belt and hook are used for proper transportation.

Carrying pipes by forklift

Carrying pipes by forklift

Vitrified clay pipes are delivered in packaged pallets and they must be unloaded directly from the trailer and placed on a smooth and firm surface. When transported pipes are stored as pallets, to transport the pipes, it must be ensured that the fork width and resistance of the forklift are sufficient to carry the appropriate load, and that the belt and hook are used for proper transport.
Restraining the clay pipe

Restraining the clay pipe

If the pipe is stored individually, it should be considered that wooden parts should be used on the lower surface of the pipe to restrain them.
Transportation of pipes on site

Transportation of pipes on site

Pipes should be kept near the pipeline. If you need to move the pipe individually, it is better to use a crane and belt instead of a loader. Avoid placing pipes on unstable surfaces to protect the pipes from falling when cutting strips. When using piping, the pipes should be placed at a suitable distance from the trench and in front of the damaged soils and restrained with pieces of wood.
Necessary care of Vitrified clay pipes in the warehouse

Necessary care of Vitrified clay pipes in the warehouse

- Pipes should not be removed from their packages until use and they should be kept away from traffic. - Pipes and fittings should be provided with suitable coatings from sunlight, high temperature - Or keep the dew away too much, which makes the pipes clean during execution. - Plastic fittings, consumable oils and rings should be stored inside covered containers and in a safe place and should be removed only when used.
Never use a loader bag to carry Vitrified clay pipes

Never use a loader bag to carry Vitrified clay pipes

Do not use the loader bag to move the Vitrified clay pipes , because due to the instability of the pipes, they are likely to be hit hard, and due to the lack of someone's belt, the pipes may slip on top of each other and fall out of the loader bag.
Transport by crane or loader

Transport by crane or loader

Do not use chains or ropes because of the possibility of broken pipes. The belt must be passed around the pipes and outside the floorboard. If necessary, a person must guide the pipes for transportation and remove any obstacles from the crane. Avoid rolling or pulling the pipes on the ground to empty the Vitrified clay pipes and prevent the possibility of breakage in the pipes.

CENTRAL OFFICE

FACTORY

All material and intellectual rights of this website belong to Persia Sofal Ab Isfahan Company